Pro-Line Engine Flush

Articlenumber: P000065
Suitable for all gasoline and diesel engines with and without a particulate filter (DPF/GPF). Ensures the perfect hydraulic function of oil-controlled systems such as VVT, VANOS and similar. Can be safely used in vehicles with toothed belt running in oil. 500 ml are sufficient for up to 5 l of oil. Tested for use with catalytic converters and turbochargers.
Causes serious eye irritation, Causes skin irritation, May be fatal if swallowed and enters airways
GHS07 GHS08

* Required Fields

Availability: In stock

$30.16 =$60.32 / 1 UNIT_SHORT_L
Incl. 15% GST

Details

Cleans the engine from the inside and removes deposits from oil holes, bearings, the piston ring area, etc. Reduces engine noise and oil consumption, improves compression and increases operating reliability of the vehicle. Allows the fresh oil to realize its full potential following an oil change.
product variants
Product Name SKU Bundle languages
Pro-Line Engine Flush 2427 500 ml Dose Blech D-GB-E-P
Pro-Line Engine Flush 2428 5 l Kanister Kunststoff D-GB
Pro-Line Engine Flush 21594 50 l Fass Schwarzblech D-GB

Additional Information

Description These highly effective detergent and dispersant additives in association with the carrier fluid have undergone extensive testing in the laboratory and in practical field trials for their ability to dissolve deposits. Oil-soluble and oil-insoluble residues are brought into suspension and removed from the oil circuit during the next oil change. The fresh oil can then deliver its full performance in the cleaned engine.
Application 500 ml is sufficient for up to 5 l of oil. Add to motor oil at operating temperature before an oil change. After adding the product, allow the engine to idle for 10 – 15 minutes depending on the degree of contamination. Then change the oil and the filter. Compatible with all commercially available motor oils.
Package Unit 6
Pallet Unit 1044